Specially designed to be used with our range of Grey Series or Battery-Free pedals - a Passive Mute Switch. As all our pedals (with the exception of the Vintage TBs)
include internal Buffer/Line Drivers, the Play/Mute Switch can be connected between the output of the last pedal in line and the amp input to facilitate a complete shutdown of signal when required.

The Mute switch is also suitable to be used at the output of other Buffered pedals - it may not be suitable to be used with true bypass or unbuffered pedals and such use is not recommended.

There is no internal Buffer/Line Driver in this unit - the 9Vdc power supply (Tip-ve) is only required to illuminate the LEDs and the Play/Mute function will still operate if the power supply is disconnected.

Dimensions: 120 X 65 X 40 mm

An input for a DC adaptor is fitted: the size of the coax connector is 5.5/2.1mm and the centre pin is negative (-VE). The voltage rating of the adaptor should be noise free, fully stabilised at 9V DC and capable of supplying 20mA. We recommend the use of the Voodoo Lab Pedal Power 2 Plus adaptor as meeting the above criteria and cannot accept any liability for damage caused to this unit by the use of, or to, any other type of AC/DC adaptor. An adapter proving an output of an AC voltage should not be used as it will permanently damage the pedal: such damage is not covered under our warranty. If only a single unit is to be powered the BOSS PSA series may be more cost effective and is also recommended.